Operation
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 53
The following is a brief description of the machine’s working methods:
The individual working methods are described on the pages below.
The description is structured as follows:
Positioning points
This item indicates the positioning points used for the different workpieces
(e.g. left and right parts).
Aligning the positioning aids
This section describes how to adjust and align the positioning aids
(e.g. positioning marks, marking lamps, stops, etc.).
Positioning and starting sewing process
This item includes a list of the individual positioning steps illustrated by
typical examples.
Working method Explanation
A • Piped pockets
• manual positioning of the piping strips, flaps and all addi-
tional parts
To Next Page
Loading...
