Dynalink DL-WRX36 User Manual

5. SPECIFY ROUTER SETTINGS VIA WEB BROWSER
29
PPPoE
Enable NAT
Network Address Translation (NAT) is a method to substitute the information of IP address space from private IP to public IP
when the devices which connected to the router access to the Internet. The router records the source/destination address on
table and maps the IP while receiving packages from Internet.
WAN Connection Type
The connection type to access Internet.
MTU
Maximum transmission unit (MTU) is the largest data packet for the router capable to transmit and receive. The data packets
exceed MTU will be fragmented while transmitting and be reassembled once the packets reach the destination.
WAN DNS Settings
Automatic DNS server address
Allows your router to get Domain name Service (DNS) IP address from the Internet Service Provider (ISP) automatically.
DNS1
Enter an IP address as the primary domain name server.
DNS2
Enter an IP address as the secondary domain name server.
Account Settings
Username
Enter username provided by your ISP.
Password
Enter password provided by your ISP.
Service Name
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Access Concentrator Name
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Additional Pppd Options
This item may be specified by some ISPs. Check with your ISP and fill them in if required.
Special Requirement
MAC Address
MAC(Media Access Control) address is a unique identifier that identifies your computer or device in the network. ISPs monitor
the MAC addresses of devices that connect to their services, and would disallow Internet connection for new MAC addresses.
To fix this issue, you can do either of the following: * Contact your ISP and request to update the MAC address associated with
your ISP subscription.* Clone or change the MAC address of the new device to match the MAC address of the original device.

Dynalink DL-WRX36 Specifications

System Memory

flash memory	256 MB
RAM	1 GB DDR4

Ports & Interfaces

wireless interface	2.4GHz and 5GHz Dual-Band Concurrent
LAN ports	4 Gigabit LAN Port
WAN port	One 2.5 Gigabit WAN Port

Wireless Specifications

wireless standard	IEEE802.11a/b/g/n/ac/ax
frequency range 2.4 GHz	2.412 GHz ~ 2.4835 GHz
frequency range 5 GHz	5.15 GHz ~ 5.35 GHz, 5.47 GHz ~ 5.85 GHz

Antenna

antenna for 2.4 GHz	4-internal
antenna for 5 GHz	4-internal
maximum output power 2.4 GHz	29 dBm
maximum output power 5 GHz	29 dBm

Power

operating voltage	12V/2.5A DC adaptor (100V~240V, 50 Hz ~ 60 Hz)
maximum power consumption	26.8 Watts

Operating Environment

operating temperature	0°C ~ 40°C
storage temperature	-40°C ~ 85°C
operating humidity	5% ~ 90% RH
storage humidity	5% ~ 95% RH

Weight and Dimensions

width	100 mm
height	230.25 mm
depth	150 mm