5. SPECIFY ROUTER SETTINGS VIA WEB BROWSER
93
5.7.1 Basic
To enable QoS feature in Dynalink router, you can configure from both, APP or Web UI. First you should enable the master QoS setting and specify
maximum upload and download bandwidth. So the QoS logic can start to drop low priority traffic when total bandwidth is approaching the limit. If
the maximum bandwidth number is set too high, QoS will not kick in, if the number is set too low, QoS logic will start to drop packets too early. The
more accurately the max bandwidth is set, the better the QoS function works. We suggest to use a speed test tool. There are many free tools on
the Internet you can use or you can check with your ISP.
To Next Page
Loading...
