Dynalink DL-WRX36 - Page 61

5. SPECIFY ROUTER SETTINGS VIA WEB BROWSER
60
Static IPv6
Connection Type
Static IPv6
IPv6 WAN Setting
WAN IPv6 Address
Enter Static IPv6 address.
WAN Prefix Length
Enter IPv6 prefix length.IPv6 Prefix Length is used to identify how many bits of a Gobal Unicast IPv6 Address are there
in a network packet.
WAN IPv6 Gateway
Enter IPv6 gateway.
IPv6 LAN Setting
Enable Static LAN
Toggle the switch to enable or disable IPv6 LAN.
LAN IPv6 Address
Internet Protocol Version 6 (IPv6) is a network layer protocol that enables data communications over a packet switched
network. IPv6 uses 128-bit numbering scheme (2
128
) which has big enough address space for many decades to come.
LAN Prefix Length
IPv6 Prefix Length is used to identify how many bits of a Gobal Unicast IPv6 Address are there in network part.
LAN IPv6 Prefix
The leftmost fields of the IPv6 address along with the network bits length represented in CIDR format is known as the
network prefix.
Enable Pool Setting For Lan Host
Select the radio button to enable or disable the pool setting for LAN host.
DHCP Pool Start
Enter the start IPv6 address of the DHCP Pool.
DHCP Pool End
Enter the end IPv6 address of the DHCP Pool.
PD-Valid Lifetime
Prefix Delegation valid lifetime.
PD-Preferred Lifetime
Prefix Delegation preferred lifetime.
LAN IPv6 MTU
MTU (Maximum Transmission Unit) is the single largest frame or packet of data that can be transmitted across a
network.