Dynatone DPR-3500 - Page 9

7
Assembly
Connecting the pedal & power cables
4
1 Connect the pedal cable to the pedal input below the main body.
The pedal cable can be found tied below the pedal box.
3
2 Raise the scoreboard on the top of the
main body and use the brackets on its back
to keep it standing.
"
$
.
1

.
6
4
*
$
"
$
.
1

.
6
4
*
$
Combining with the main body
"
$
1

6
4
*
$
Pedal input, located below the main body
1 Carefully place the main body onto the assembled lower body according to the picture
so that its holes would match the brackets attached to each leg. Use the remaining Main Body
Fixers (e, 6EA) to secure the connection between the main and lower bodies.
"$*/&5
e