Proteus operation manual
123
MIDI SPECIFICATIONS
MIDI Specifications
Parameter Number Parameter Name
115-117 footswitch dest 1-3
118-121 controller amount A-D
122 pressure amount
123 pitch bend range
124 velocity curve
125 keyboard center
126 submix
127 keyboard tuning
GLOBAL/SETUP PARAMETERS
Parameter Number Parameter Name
256 MIDI basic channel
257 MIDI volume
258 MIDI pan
259 current preset
260 master tune
261 transpose
262 global pitch bend range
263 global velocity curve
264 MIDI mode
265 MIDI overflow
266-269 controller A-D numbers
270-272 footswitch 1-3 numbers
273 mode change enable
274 device ID number
384-399 MIDI channel enable
400-415 MIDI program change enable
416-431 mix out (per MIDI channel)
512-639 MIDI program/preset map
Program Mapping
MIDI program changes will normally correspond to internal preset
numbers 0-127. However, the user may "re-map" any MIDI program
number, assigning it to an arbitrary internal preset. This feature allows
any of the internal presets to be selected from a MIDI keyboard controller.
PRESET PARAMETERS (cont)
To Next Page
Loading...
