EA Technology UltraTEV Plus
2
Operating Manual 2388L015
Page 8 of 66
5.1 Charging the UltraTEV Plus
2
The UltraTEV Plus² charges via the Micro USB port on the base of the instrument. The
UltraTEV Plus² can be charged from the supplied mains or in-car charger or from a standard
USB port.
The level of charge is indicated in the top right hand corner of the notification bar during
operation. During charging with the instrument switched off, the charge status is indicated
via the charging indicator LED on the base of the instrument.
When the battery is being charged, the charging indicator turns Amber
When the battery is fully charged, the charging indicator turns Green
For the quickest charging time, turn off the UltraTEV Plus
2
instrument
during charging. Charging time is extended when connected to a USB port
compared to the mains charger.
The TEV/Cable PD and Ultrasonic measuring features are automatically
disabled when the instrument is being charged.
A fully-charged battery should provide approximately 6 hours of continuous
use while switched on and measuring. For practical purposes, a fully
charged battery should last a full day of surveying.
5.2 Turning the UltraTEV Plus² On/Off
Press and hold the Home Button for 1 second to turn on the UltraTEV Plus
2
.
The UltraTEV Plus
2
will boot displaying the EA Technology logo before proceeding to the
main menu after a few seconds.
To turn off the UltraTEV Plus
2
, hold the Home button for 2 seconds, the screen will go
off and the instrument will power down.
To Next Page
Loading...
Need help?
General