EA Technology UltraTEV Plus
2
Operating Manual 2388L015
Page 63 of 66
13. Calibration
Calibration interval: 12 months
Your application may require a different calibration interval dependant on the frequency of
use. The calibration interval should begin on the date the UltraTEV Plus² is placed in
service.
14. Repair
For information on repairs
15. Waste Electrical and Electronic Equipment
Directive (WEEE)
EA Technology is a member of an approved compliance scheme as defined by the WEEE
directive. When an EA Technology product reaches the end of its operational life, it must
be recycled by a licensed waste management operator, or returned to EA Technology for
recycling.
16. Continuous Improvement
EA Technology has a policy of continual product development and enhancement.
Consequently, there may be minor variations in specifications or operation that are not
covered in this operating manual.
Every effort has been made to ensure that the information provided in this operating
manual is accurate at the time of going to print.
If any errors or omissions are noticed, please notify
To Next Page
Loading...
Need help?
General