EA Technology UltraTEV Plus
2
Operating Manual 2388L015
Page 30 of 66
To install a firmware update from the MicroSD card, press the “Check MicroSD for Update”
button on the above screen. The MicroSD card will be checked for any available updates,
and details populated on the display as shown below. To install the update found, press
the tick icon on the right of the menu bar and await the process to complete.
An update can only be installed if the instrument is plugged into the mains charger to avoid
any unwanted shutdown due to low battery whilst performing the update process. Once
installed, the instrument must be restarted to run the latest update.
To check you have the most current software version or if you need
assistance in updating your instrument, please contact product support
To Next Page
Loading...
Need help?
General