Eaton 9355 - 4.2.2 Two-High UPS Cabinets

34 Eaton 9355 UPS (10/15 kVA) User’s Guide 164201594—Rev H0
Figure 14. Unloading the Cabinet
9. With the cabinet supported, slowly pull the pallet away from the cabinet (see Figure 15).
Figure 15. Removing the Pallet
10. Roll the cabinet to the desired location.
11. Proceed to paragraph 4.3.1 Selecting an Installation Option.
44..22..22 TTwwoo--HHiigghh UUPPSS CCaabbiinneettss
To remove a two-high UPS from the shipping pallet:
1. Remove the M10 bolt securing the vertical bracket to the pallet (see Figure 16).
2. Remove and retain the three M4 screws securing the vertical bracket to the UPS. Remove the vertical
bracket.
UPS System Installation