Eaton 9355 - Page 57

Eaton 9355 UPS (10/15 kVA) User’s Guide 164201594—Rev H0 45
Figure 29. UPS Terminal Block (3-High Shown)
Ground
Maintenance
Bypass
Contacts
TB2
14. Hardwire the output terminations from the UPS to the bypass cabinet (see Figure 30).
Figure 30. Version 1 UPS Output to Bypass Cabinet Wiring
Neutral
Line 1
Line 2
Line 3
Ground
15. Hardwire the load to the bypass cabinet (see Figure 31).
16. Route the maintenance bypass wires through the conduit to the UPS terminal block (see Figure 29).
UPS System Installation