Eaton 9390 - Chapter 9 UPS Operating; System Controls

99 Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F
The CCHHGGRR pushbutton switch toggles the charger function On and Off. The PM pushbutton switch toggles the
power module function On and Off.
For detailed information about using the System Controls, see Chapter 9 UPS Operating Instructions.
FFiigguurree 6699.. SSyysstteemm CCoonnttrroollss SSccrreeeenn 33
SYSTEM CONTROLS
LOAD OFF HI ALRTENGY SVR
MAINTENANCE BYPASS
BYPASS
POWER MODULE (PM)
OFF:
OFF:
SHUTDOWN:
CHARGER OFF:
While in Energy Saver mode, the amber BYPASS LED will be off and green NORMAL LED will be on solid.
FFiigguurree 7700.. SSyysstteemm CCoonnttrroollss SSccrreeeenn 33 -- EEnneerrggyy SSaavveerr MMooddee SSeelleecctteedd
SYSTEM CONTROLS
LOAD OFF HI ALRTENGY SVR
MAINTENANCE BYPASS
BYPASS
POWER MODULE (PM)
OFF:
OFF:
ENERGY SAVER:
CHARGER OFF:
Using the Control Panel
For Internal Use Only