Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 78
The Output Total System screen shows output voltage (phase–to–neutral), output current (each phase), and
frequency being supplied by the UPS, as well as the kVA, kW, and power factor measurements for the total
system. The displayed voltages and frequency are the highest measured value of all UPSs. The displayed
currents, kVA, and kW are totals of all UPSs, and the PF is calculated from the total values for the kVA and kW.
FFiigguurree 4488.. TToottaall SSyysstteemm OOuuttppuutt MMeetteerr SSccrreeeenn
V1
V2 V3
KVA KW
PF
I1 I2 I3
***
*** *** ***
******
***
***
***
FREQ
***
OUTPUT TOTAL SYSTEM
LEAD
UNITSYSTEM
Using the Control Panel
To Next Page
Loading...
