Eaton 9390 - Battery - Unit

Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 56
The Battery screen displays the battery voltage (Vdc), the battery current (Idc), the minutes of battery time
remaining, and battery temperature. Battery temperature must be set up by an authorized Eaton Customer
Service Engineer. When battery life decreases to less than 20%, Check Battery is displayed.
FFiigguurree 2255.. UUnniitt BBaatttteerryy MMeetteerr SSccrreeeenn
VDC
IDC
TIME REMAINING
***
***
V
A
***
MINUTES
BATTERY - UNIT
UNITSYSTEM
TEMPERATURE
**
DEGREES C
The Output Current Screen displays a real–time bar graph of the output current of the UPS. The graph shows
the current for each phase.
FFiigguurree 2266.. UUnniitt OOuuttppuutt CCuurrrreenntt ((LLooaadd)) MMeetteerr SSccrreeeenn
L2
L3
125%
100%
75%
50%
25%
0%
OUTPUT CURRENT - UNIT
L1
UNITSYSTEM
Using the Control Panel
For Internal Use Only