49 Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F
CChhaapptteerr 88 UUssiinngg tthhee CCoonnttrrooll PPaanneell
This chapter describes the UPS control panel, including controls and indicators, and how to monitor UPS
operation. The control panel (see Figure 17) is located on the front door of the UPS .
FFiigguurree 1177.. UUPPSS CCoonnttrrooll PPaanneell
3
1
2
PRESS ANY KEY TO CONTINUE
The control panel consists of the following:
• A liquid crystal display (LCD) (11)
• A horizontal row of pushbutton switches (22)
• A vertical column of status indicators (33)
The following sections describe using the UPS control panel to monitor the UPS. See
Chapter 9 UPS Operating Instructions for use of the operational controls.
When the UPS powers up, the screen displays the Eaton logo as shown in Figure 17. To advance to the Main
Menu and Mimic screen, press any control panel pushbutton once.
Using the Control Panel
To Next Page
Loading...
