53 Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F
Press the HHIISSTTOORRYY pushbutton on the Active Events Menu bar to display the History Log. The History Log
lists up to the 512 system events in chronological order, with the most recent event listed last (once 512 is
reached, the earliest event is overwritten). The History Log lists the events in the following groups:
• User and service status
• User instruction
• User alarm
• Check UPS
• Schedule service
• UPS shutdown
• Service alarm
The end of the log (the most recent events) appears when you display the screen, and you must scroll upward
to view older event listings. Figure 21 shows the History screen.
To scroll through the events, press the
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
or
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
pushbuttons on the menu bar. To return to the Active Events
screen, press the EEVVEENNTTSS pushbutton on the menu bar
FFiigguurree 2211.. HHiissttoorryy SSccrreeeenn
NOTICE:
ALARM:
NOTICE:
NOTICE:
5 of 29 02 / 26 / 2004 10 : 20 : 03 . 539
CONTROL POWER ON
BUILDING ALARM 1 OK
NORMAL COMMAND
TO BYPASS COMMAND
HISTORY
EVENTS
NOTICE:
UPS OFF
Using the Control Panel
To Next Page
Loading...
