Eaton 9390 - Active Events; Kw Demand Log

Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 60
Press the LLOOGG pushbutton on the kW Demand Log Summary Menu bar to display the kW Demand Log screen.
The kW Demand Log screen displays the individual log entries, including the interval date and time frame, the
maximum reading during the interval, the total time over limit during the interval, an estimated number of total
kWh used during the interval, and the number of times over limit during the interval. If no events have
occurred, the screen displays LOG EMPTY. Figure 30 shows the kW Demand Log screen.
To scroll through the individual events, press the
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
or
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
pushbuttons on the menu bar. To return to the kW
Demand Log Summary screen, press the SSUUMMMMAARRYY pushbutton on the menu bar.
To clear the kW Demand Log, press the RREESSEETT pushbuttonon the menu bar.
FFiigguurree 3300.. kkWW DDeemmaanndd LLoogg SSccrreeeenn
KW DEMAND LOG
SUMMARY
INTERVAL : 07/30/2005
TIME OVER LIMIT
KWH USED OVER LIMIT
MAXIMUM READING (KW)
15 : 26 : 10 – 15 : 30 : 10
*** . ** KW
2 MINUTES
*** . **
RESET
KW DEMAND EVENT
NUM TIMES OVER THIS INTERVAL
6/ 12
3
Using the Control Panel
For Internal Use Only