Eaton 9390 - Figure 86. 164201604-8 Interface Wiring Installation Notes and Terminal Locations

Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 176
FFiigguurree 8866.. 116644220011660044--88 IInntteerrffaaccee WWiirriinngg IInnssttaallllaattiioonn NNootteess aanndd TTeerrmmiinnaall LLooccaattiioonnss ((CCoonnttiinnuueedd))
091505 A
164201604-8
DESCRIPTION:
DATE:
: T E E H S : O N G N I W A R D
REVISION:
INTERFACE WIRING INSTALLATION
NOTES AND TERMINAL LOCATIONS
NOTE:1. All building alarm inputs require an isolated normally‐open or
normally‐closed contact or switch (rated at 24 Vdc, 20 mA minimum)
connected between the alarm input and common terminal as shown. Building
alarm inputs can be programmed for use with either normally‐open or
normally‐closed contacts. All control wiring and relay and switch contacts are
customer‐supplied.
2. The building alarms can be programmed to display the alarm functional
name.
MINI‐CSB INTERFACE TERMINALS
4 of 15
1
8
P5
BUILDING ALARM 3
BUILDING ALARM 3 RETURN
MINI‐CSB
BUILDING ALARM 4
BUILDING ALARM 5
BUILDING ALARM 6
BUILDING ALARM 4 RETURN
BUILDING ALARM 5 RETURN
BUILDING ALARM 6 RETURN
Installation Information
For Internal Use Only