Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 82
The Battery screen displays the battery voltage (Vdc), the battery current (Idc), the minutes of battery time
remaining, and battery temperature. Battery temperature must be set up by an authorized Eaton Customer
Service Engineer When battery life decreases to less than 20%, Check Battery is displayed.
FFiigguurree 5522.. BBaatttteerryy UUnniitt XX MMeetteerr SSccrreeeenn
VDC
IDC
TIME REMAINING
***
***
V
A
***
MINUTES
BATTERY UNIT X
UNITSYSTEM
TEMPERATURE
**
DEGREES C
The Output Current screen displays a real–time bar graph of the output current of the UPS for the selected
UPS. The graph shows the current for each phase.
Using the Control Panel
To Next Page
Loading...
