Eaton 93PR - Lps; Control Panel; Figure 6-2: UPS Color Touch Screen Control Panel (Typical); Table 6-1: Status Indicator

Eaton 93PR 500 kW UPS
User's and Installation Guide 52
6.1. LPS
The LED Power Show (LPS) consists of two rows of LEDs located on the left and right sides of the UPS cabinet door.
The LEDs are of red, green and yellow (RGY). The color of the LEDs is used to show the condition of the UPS. Only one
color is shown at one time. The most urgent condition is always shown. The priority rank is Red,Yellow and Green.
Table 6-1: Status Indicator
UPS Status LPS Indicator LED Indicator (See table 6-2)
Normal mode
Green lighting Green lighting
Battery Mode
Green twinkle Yellow lighting, Green lighting
Bypass Mode
Yellow lighting Yellow lighting
Alarm or Fault
Red lighting Red lighting
6.2. Control Panel
The following sections describe the UPS control panel and how to monitor and control UPS operation.
2
Figure 6-2: UPS Color Touch screen Control Panel (Typical)