Eaton 93PR 500 kW UPS
User's and Installation Guide
80
Chapter 11 APPENDIX A: USER SETTINGS
The UPS has the following settings that are user modifiable. In the Home screen, select Settings. User settings:
Table 11-1: User Settings
To modify the Config settings, you need to sign in.
Setting Description
Info
Information on the UPS model, including part number and
serial number.
About
Version information.
Clear Status
Reset system Status.
Clear Alarms
Reset Sticky Alarms.
Table 11-2: Config Settings
Setting Description
Language
Change the user interface language.
Unit Name
Change the unit name.
Clock
Change the date and time, change the clock for-mat or
enable/disable NTP clock setup.
Signal Inputs
Select signal input name and function.
Relay Outputs
Configure the relay outputs.
Battery Test
Change the power level and duration for battery test.
Bypass Limits
Change bypass voltage, bypass frequency or by-pass slew
rate limits.
Screen Saver Timeout
Change the screen saver timeout.
Meters
Change the meters format.
Lamp Test
Enable the lamp test.
HMI backlight
Adjust the backlight brightness.
Control P/W level 1
Change the level 1 password, or remove the password on
level 1. The default value is 1111.
Config P/W level 2
Change the level 2 password. The default value is 101.
To Next Page
Loading...
