7. System settings
7. System settings
The "System settings" section groups together the various basic settings for the device,
and accordingly can be used as a reference guide.
It is important to note where the relevant system setting can be configured, i.e.,
with the display on the EASY-E4-...-12...C1 under SYSTEM OPTIONS and/or only in
easySoft 7 after selecting the device. Programming and integrating the easyE4 device
into a group are also important within this context.
The following settings can only be configured with easySoft 7 as of this writing:
Connection to other devices
Setting up a NET → page 537
Modbus TCP → page 545
Setting up a web server → page 560
E-mail function → page 562
Configuration
Download comments → page 470
Define program name → page 472
Retention function → page 473
Configuring the memory card and device ID → page 481
easyE4 11/18 MN050009 EN www.eaton.com
459
To Next Page
Loading...
Need help?
General