Eaton EDR-5000 - Page 261

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Latched Config Bin
Inp1
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp2 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
Prot.Pickup [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp2
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp3 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
Prot.Trip [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp3
Latched Configurable Binary Input Inactive,
Active
Active [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp4 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp4
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp5 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp5
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 261