Eaton EDR-5000 - Page 262

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Config Bin Inp6 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp6
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp7 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp7
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp8 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp8
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp9 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
Bkr.Pos OPEN [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp9
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp10 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
Bkr.Pos CLOSE [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 262