Eaton EDR-5000 - Page 263

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Latched Config Bin
Inp10
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp11 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
BF.Pickup [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp11
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp12 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
BF.Trip [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp12
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp13 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
BF.Lockout [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp13
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp14 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp14
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 263