Eaton EDR-5000 - Page 264

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Config Bin Inp15 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp15
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp16 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp16
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp17 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
Sgen.Running [Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp17
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp18 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
Sys.Maint Mode
Active
[Device Para
/Modbus
/Configb Registers
/States]
Latched Config Bin
Inp18
Latched Configurable Binary Input Inactive,
Active
Inactive [Device Para
/Modbus
/Configb Registers
/States]
Config Bin Inp19 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Modbus
/Configb Registers
/States]
www.eaton.com 264