Eaton EDR-5000 - Page 268

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Mapped Meas 1 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 2 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 3 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 4 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 5 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 6 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 7 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 8 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 9 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
www.eaton.com 268