Eaton EDR-5000 - Page 269

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Mapped Meas 10 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 11 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 12 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 13 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 14 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 15 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
Mapped Meas 16 Mapped Measured Values. They can be used to provide
measured values to the Modbus Master.
1..n, TrendRecList -.- [Device Para
/Modbus
/Configb Registers
/Measured Values]
www.eaton.com 269