Eaton EDR-5000 - Page 281

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Latched 9 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 10 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 10 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 11 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 11 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 12 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 12 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 13 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 13 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 14 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
www.eaton.com 281