Eaton EDR-5000 - Page 282

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Latched 14 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 15 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 15 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 16 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 1-
16]
Latched 16 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 1-
16]
Config Bin Inp 17 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Latched 17 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 18 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Latched 18 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 19 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
www.eaton.com 282