Eaton EDR-5000 - Page 283

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Latched 19 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 20 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Latched 20 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 21 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Latched 21 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 22 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Latched 22 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 23 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Latched 23 Defines whether the Input is latched.
Only available if: Latched = Active
Inactive,
Active
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
Config Bin Inp 24 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
1..n, Assignment
List
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
www.eaton.com 283