Eaton EDR-5000 - Page 313

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Optical rest position Optical rest position Light off,
Light on
Light on [Device Para
/DNP
/Communication]
SelfAddress Support of self (automatic) addresses Inactive,
Active
Inactive [Device Para
/DNP
/Communication]
DataLink confirm Enables or disables the data layer confirmation (ack). Never,
Always,
On_Large
Never [Device Para
/DNP
/Communication]
t-DataLink confirm Data layer confirmation timeout 0.1 - 10.0s 1s [Device Para
/DNP
/Communication]
DataLink num
retries
Number of repetition of data link packet sending after
failing
0 - 255 3 [Device Para
/DNP
/Communication]
Direction Bit Enables Direction Bit functionality. The Direction Bit is 0
for SlaveStation and 1 for MasterStation
Inactive,
Active
Inactive [Device Para
/DNP
/Communication]
Max Frame Size This value is used to limit the net Frame Size 64 - 255 255 [Device Para
/DNP
/Communication]
Test Link Period This value specifies the time period when to send a Test
Link-Frame
0.0 - 120.0s 0s [Device Para
/DNP
/Communication]
AppLink confirm Determines if the device will request that the Application
Layer response be confirmed or not
Never,
Always,
Event
Always [Device Para
/DNP
/Communication]
t-AppLink confirm Application layer response timeout 0.1 - 10.0s 5s [Device Para
/DNP
/Communication]
www.eaton.com 313