Eaton EDR-5000 - Page 322

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
BinaryInput 63 Virtual Digital Input (DNP). This corresponds to a virtual
binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Binary Inputs]
DoubleBitInput 0 Double Bit Digital Input (DNP). This corresponds to a
double bit binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Double Bit Inputs]
DoubleBitInput 1 Double Bit Digital Input (DNP). This corresponds to a
double bit binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Double Bit Inputs]
DoubleBitInput 2 Double Bit Digital Input (DNP). This corresponds to a
double bit binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Double Bit Inputs]
DoubleBitInput 3 Double Bit Digital Input (DNP). This corresponds to a
double bit binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Double Bit Inputs]
DoubleBitInput 4 Double Bit Digital Input (DNP). This corresponds to a
double bit binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Double Bit Inputs]
DoubleBitInput 5 Double Bit Digital Input (DNP). This corresponds to a
double bit binary output of the protective device.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/Double Bit Inputs]
BinaryCounter 0 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
BinaryCounter 1 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
www.eaton.com 322