Eaton EDR-5000 - Page 323

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
BinaryCounter 2 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
BinaryCounter 3 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
BinaryCounter 4 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
BinaryCounter 5 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
BinaryCounter 6 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
BinaryCounter 7 Counter can be used to report counter values to the DNP
master.
1..n, Assignment
List
-.- [Device Para
/DNP
/Point map
/BinaryCounter]
Analog value 0 Analog value can be used to report values to the master
(DNP)
1..n, TrendRecList -.- [Device Para
/DNP
/Point map
/Analog Input]
www.eaton.com 323