Eaton EDR-5000 - Page 350

EDR-5000 IM02602007E
Signal Description
BinaryOutput29 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput30 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput31 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
DNP Values
Value Description Default Size Menu path
NReceived Diagnostic counter: Number of received
characters
0 0 - 9999999999 [Operation
/Count and RevData
/DNP]
NSent Diagnostic counter: Number of sent characters 0 0 - 9999999999 [Operation
/Count and RevData
/DNP]
NBadFramings Diagnostic counter: Number of bad framings. A
large number indicates a disturbed serial
connection.
0 0 - 9999999999 [Operation
/Count and RevData
/DNP]
NBadParities Diagnostic counter: Number of parity errrors. A
large number indicates a disturbed serial
connection.
0 0 - 9999999999 [Operation
/Count and RevData
/DNP]
NBreakSignals Diagnostic counter: Number of break signals. A
large number indicates a disturbed serial
connection.
0 0 - 9999999999 [Operation
/Count and RevData
/DNP]
NBadChecksum Diagnostic counter: Number of frames received
with bad checksum.
0 0 - 9999999999 [Operation
/Count and RevData
/DNP]
www.eaton.com 350