Eaton EDR-5000 - Page 349

EDR-5000 IM02602007E
DNP Signals (Output States)
Some signals (that are for a short time active only) have to be acknowledged
separately (e.g. Trip signals) by the Communication System.
Signal Description
busy This message is set if the protocol is started. It will be reset if the protocol is shut down.
ready The message will be set if the protocol is successfully started and ready for data exchange.
active The communication with the Master (Scada) is active.
BinaryOutput0 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput1 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput2 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput3 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput4 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput5 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput6 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput7 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput8 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput9 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput10 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput11 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput12 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput13 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput14 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput15 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput16 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput17 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput18 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput19 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput20 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput21 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput22 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput23 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput24 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput25 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput26 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput27 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
BinaryOutput28 Virtual Digital Output (DNP). This corresponds to a virtual binary input of the protective device.
www.eaton.com 349