Eaton EDR-5000 - Page 428

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Trigger11 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 50R[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger12 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 50R[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger13 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 51R[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger14 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 51R[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger15 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 27M[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger16 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 27M[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger17 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 59M[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger18 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 59M[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger19 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 27A[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger20 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 27A[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger21 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 59A[1].TripCmd [Control
/Bkr
/Trip Manager]
www.eaton.com 428