EDR-5000 IM02602007E
Non-discriminating load shedding by means of adaptive parameters
By means of adaptive parameters a non-discriminating load shedding can be established. By means of this
commissioning and setting parameters newly is not required. Adaptive parameters/settings offer the possibility to switch
the setting of a single function by an activation signal without switching to another parameter set.
Assign the signals that should activate the corresponding adaptive parameters within the Global Parameters
[Protection Para\Global Prot Para\UFLS] (please refer to chapter Adpative Parameters).
Within the Protection Parameters [Protection Para\Set[x]\UFLS\Load shedding] the adaptive parameters itself can be
set.
Device Planning Parameters of the UFLS Module
Parameter Description Options Default Menu path
Mode Mode Do not use,
Use
Do not use [Device Planning]
www.eaton.com 797
To Next Page
Loading...
