Eaton EDR-5000 - Page 798

EDR-5000 IM02602007E
Global Protection Parameters of the UFLS Module
Parameter Description Setting range Default Menu path
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/UFLS]
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/UFLS]
Ex Pdir Ignore (block) the evaluation of the power flow direction.
This results in classical frequency based load shedding
functionallity. When this feature is set and active, the
functionallity of the module turns into conventional, only
frequency based load shedding.
1..n, Assignment
List
-.- [Protection Para
/Global Prot Para
/UFLS]
P Block dir By means of this parameter the block direction of active
power can be inverted within this (sign reversal).
positive,
negative
negative [Protection Para
/Global Prot Para
/UFLS]
AdaptSet 1 Assignment Adaptive Parameter 1 AdaptSet -.- [Protection Para
/Global Prot Para
/UFLS]
AdaptSet 2 Assignment Adaptive Parameter 2 AdaptSet -.- [Protection Para
/Global Prot Para
/UFLS]
AdaptSet 3 Assignment Adaptive Parameter 3 AdaptSet -.- [Protection Para
/Global Prot Para
/UFLS]
AdaptSet 4 Assignment Adaptive Parameter 4 AdaptSet -.- [Protection Para
/Global Prot Para
/UFLS]
AdaptSet 5 Assignment Adaptive Parameter 5 AdaptSet -.- [Protection Para
/Global Prot Para
/UFLS]
www.eaton.com 798