Eaton EDR-5000 - Page 867

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
LE1.Inverting3 Inverting the input signals.
Only available if an input signal has been assigned.
Inactive,
Active
Inactive [Logic
/LE 1]
LE1.IN4 Assignment of the Input Signal 1..n, Assignment
List
-.- [Logic
/LE 1]
LE1.Inverting4 Inverting the input signals.
Only available if an input signal has been assigned.
Inactive,
Active
Inactive [Logic
/LE 1]
LE1.t-On Delay Switch On Delay 0.00 - 36000.00s 0.00s [Logic
/LE 1]
LE1.t-Off Delay Switch Off Delay 0.00 - 36000.00s 0.00s [Logic
/LE 1]
LE1.Reset Latched Reset Signal for the Latching 1..n, Assignment
List
-.- [Logic
/LE 1]
LE1.Inverting Reset Inverting Reset Signal for the Latching Inactive,
Active
Inactive [Logic
/LE 1]
LE1.Inverting Set Inverting the Setting Signal for the Latching Inactive,
Active
Inactive [Logic
/LE 1]
www.eaton.com 867