Eaton i-on16 - Radio Hold Up Alarms (HUA)

4. Administration i-on16
Page 42
Radio Hold Up Alarms (HUA)
No user can change any other user’s radio HUA. (A Master User can
register a radio HUA for a new user when they first add the user to the
system, see page 45.) Any user except a Guard or Set Only user can
register a radio HUA for themselves.
Note: While you are registering a new radio HUA the control unit will not
respond to an alarm signal from any radio HUA it has already
learned.
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press  .


If you are a Master User:
(otherwise go to step 6)
5. Press .


a) Press .


b) Press .


c) Press  or . until the bottom
line of the display shows your own
user name.


d) Press .


e) Press  or . until the bottom line
of the display shows:


f) Go on to step 8.
If you are a Normal User:
6. Press .

