UPS Installation Plan and Unpacking
Eaton
®
Power Xpert
®
9395P-900 UPS Installation and Operation Manual P-164000501—Rev 09 www.eaton.com/powerquality 3-35
CAUTION
To reduce the risk of fire, connect only to a circuit provided with maximum input circuit breaker
current ratings from Table 3-25 in accordance with the NEC, ANSI/NFPA 70.
ATTENTION!
Pour réduire le risque d’incendie, ne brancher qu’à un circuit avec le courant nominal maximal du
disjoncteur d’entrée indique dans le tableau 3-25 (Table 3-25) conformement à la norme ANSI/
NFPA 70 du NEC.
The line-to-line unbalanced output capability of the UPS is limited only by the full load per phase current values
for AC output to critical load shown in Table 3-7 toTable 3-10. The recommended line-to-line load unbalance is
50% or less.
Bypass and output overcurrent protection and bypass and output disconnect switches are to be provided by
the customer. Module Output Breakers (MOBs) are to be provided by the customer.
Table 3-26 lists the recommended rating for 480V, 415V, 400V, and 380V bypass, output, and MOB circuit
breakers. Bypass breakers are not applicable for IOM configurations.
Eaton 9395P-900/400
See Note
100 600A 700A 800A 800A
80 800A 1000A 1000A 1000A
NOTE Because of the future upgradability to a fully rated 900 kW UPS with the addition of the FI-UPM, Eaton recommends using the breaker size
specified for a 1100 kW UPS.
Table 3-25. Recommended Input Circuit Breaker Ratings (100% and 80% Load Rating) (Continued)
UPS Model
Input Rating
% 480V 415V 400V 380V
NOTE For the 9395P-900 400/415/380V models, the max output is 825 kW/ 825 kVA.
Table 3-26. Recommended Bypass, Output, and MOB Circuit Breaker Ratings (100% and 80% Load Rating)
UPS Model
Input Rating
% 480V 415V 400V 380V
Eaton 9395P-900/900
100 1200A N/A N/A N/A
80 1600A N/A N/A N/A
Eaton 9395P-900/825
100 1000A 1200A 1200A 1600A
80 1600A 1600A 1600A 1600A
Eaton 9395P-1200/750
100 1000A 1200A 1200A 1200A
80 1200A 1600A 1600A 1600A
Eaton 9395P-1200/675
100 1000A 1000A 1000A 1200A
80 1200A 1200A 1600A 1600A
Eaton 9395P-1200/600
100 800A 1000A 1000A 1000A
80 1000A 1200A 1200A 1200A
Eaton 9395P-900/550
100 700A 800A 800A 1000A
80 1000A 1000A 1000A 1200A