Eaton PowerXL DM1 Series - Page 26

16
Chapter 4—Mechanical installation
POWERXL SERIES VFDS MN040060EN—September 2020 www.eaton.com
Table 16. Approximate space requirements in inches (mm).
Output rating Mounting clearance imperial Airflow
Input voltage Frame size
Drive
catalog
number
CT/IH
current
amps
VT/IL
current
amps
A
in. (mm)
B
in. (mm)
C
in. (mm)
D
in. (mm) CFM (m3/h)
380 Vac to 480
Vac, 50/60 Hz
3-phase
FR1 DM1-341D5… 1.5 2.2 0 0 1.97 (50) 1.97 (50) 14.83 (25.2)
DM1-342D2… 2.2 4.3 0 0 1.97 (50) 1.97 (50) 14.83 (25.2)
DM1-344D3… 4.3 5.6 0 0 1.97 (50) 1.97 (50) 14.83 (25.2)
DM1-345D6… 5.6 7.6 0 0 1.97 (50) 1.97 (50) 14.83 (25.2)
FR2 DM1-347D6… 7.6 12 0 0 1.97 (50) 1.97 (50) 37.4 3 (6 3.6)
DM1-34012… 12 16 0 0 1.97 (50) 1.97 (50) 37.4 3 (63.6)
DM1-34016… 16 23 0 0 1.97 (50) 1.97 (50) 37.4 3 (63.6)
FR3 DM1-34023.. 23 31 0 0 1.97 (50) 1.97 (50) 58.61 (99.6)
FR4 DM1-34 031… 31 38 0 0 1.97 (50) 1.97 (50) 57.5 6 (97.8)
DM1-34038… 38 46 0 0 1.97 (50) 1.97 (50) 57.5 6 (9 7.8)
525 Vac to 600
Vac, 50/60 Hz
3-phase
FR2 DM1-354D5… 4.5 7.5 0 0 1.97 (50) 1.97 (50) 37.43 (63.6)
DM1-357D5… 7.5 10 0 0 1.97 (50) 1.97 (50) 37.43 (6 3.6)
DM1-35010… 10 13.5 0 0 1.97 (50) 1.97 (50) 37.4 3 (6 3.6)
FR3 DM1-35013… 13.5 18 0 0 1.97 (50) 1.97 (50) 58.61 (99.6)
FR4 DM1-35018… 18 22 0 0 1.97 (50) 1.97 (50) 57.5 6 (9 7.8)
DM1-35022… 22 27 0 0 1.97 (50) 1.97 (50) 57.5 6 (97.8)
Note: The dimension for A in the table 2 will change if the option cards are used.
(continued).