Eaton PowerXL DM1 Series - Figure 26. DM1 Pro FR3 with NEMA 1 Kit Dimension Drawing

79
Appendix C—Dimension drawings
POWERXL SERIES VFDS MN040060EN—September 2020 www.eaton.com
Approximate dimensions in inches (mm).
Figure 26. DM1 Pro FR3 with NEMA 1 kit dimension drawing.
DM1 PRO FR3 With NEMA 1 Kit Dimension Drawing
Minimum Dimensions:
A = Free space on the left of drive
B = Free space on the right of drive
C = Free space above drive
D = Free space below drive
Notes:
A=0 for drive without option card
A=70mm for drive with option card
180 [7.092]
432.66 [17.047]
130 [5.122]
116 [4.570]
Ø5.5 [Ø0.217]
247 [9.732]
260 [10.244]
126.2 [4.972]
2-Ø22.5 [Ø0.887]
3-Ø28.3 [Ø1.115]
C(50[1.969])
A(0/70[2.756])
B(0)
D(90[3.543])