48
Appendix A—Technical data and specifications
POWERXL SERIES VFDS MN040060EN—September 2020 www.eaton.com
Table 27. PowerXL DM1 Series specifications (continued).
Section Description Specification
Environmental Ambient operating temperature -10°C (no frost) to +50°C, up to +60°C with derating (CT)
-10°C (no frost) to +40°C, up to +60°C with derating (VT)
Storage temperature -40°C to +70°C
Relative humidity 0-95% RH, noncondensing, non-corrosive
Air quality:
• Chemical vapors
• Mechanical particles
Tested according to IEC 60068-2-60 Test Key:
Flowing mixed gas corrosion test, method 1 (H2S [hydrogen sulfide] and SO2
[sulfur dioxide])
Designed according to:
IEC 60721-3-3, unit in operation, class 3C2
Vibration:
• EN 61800-5-1
• EN 60068-2-6
Vibration test at operating status
Displacement amplitude: 0.075 mm (peak) at 10 Hz to 57 Hz
Maximum acceleration amplitude: 1g at 57 Hz to 150 Hz
Shock:
• EN 60068-2-27
Shock test at operating status
Peak acceleration: 15 g
Duration: 11 ms
Transportation:
• ISTA 1 A
Transported as a single device in a separate package,
Vibartion test and drop test per ISTA 1A
Overvoltage Overvoltage Category III
Pollution degree Pollution Degree 2
Enclosure Class IP20 standard in entire kW/hp range
NEMA 1 / UL Type 1 with accessory kit
EMC EN 61800-3, 2nd environment
Altitude 100% load capacity (no derating) up to 3280 ft (1000 m)
1% derating for each 328 ft (100 m) above 3280 ft (1000 m)
up to 6562 ft (2000 m) (UL listing)
up to 13123 ft (4000 m) (without UL listing)
If the installation site is higher than 6562 ft (2000 m) above sea level, contact
your local Eaton representative for further information.
MTBF 300,000 Hours
Standards Safety UL 61800-5-1, CSA C22.2 No. 274-17 and IEC/EN 61800-5-1
EMC EN 61800-3, 2nd environment, Category 2
STO Cat. 3 / PL d acc. to ISO 13849-1
SIL 2 / SIL CL 2 acc. to IEC 61800-5-2 / IEC 62061 / IEC 61508
Electrostatic discharge Second environment, IEC 61000-4-2, 4 kV CD or 8 kV AD, Criterion B
Fast transient burst Second environment, IEC 61000-4-4, 2 kV/5 kHz, Criterion B
Approvals CE, UL and cUL, EAC, RCM (C-Tick), RoHS, TUV (STO), FCC (Bluetooth)
To Next Page
Loading...
