Appendix A
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
129
Append ix A
Speci fic ations
SC300 system controller
Communications
USB Type:
Connector:
USB 2.0
USB Micro type AB
RS-232 Interface:
Connector:
RS-232 (DTE)
DB9M
RS-485 (some versions only) Connector: DB9M
Ethernet Interface:
Connector:
Protocols:
100baseT
RJ45
TCP/IP, SNMP, S3P over IP,
http (Web), https (secure Web),
SMTP, Modbus-TCP, Serial
Server
MAC Address: See details on page 104.
Web browser: Microsoft Internet Explorer 11
3
or later, Mozilla Firefox 3.0 or
later.
IOBGP I/O Board
The following specifications apply to a single IOBGP I/O board connected to the SC300 system
controller.
Digital Outputs/Alarm Relays (IOBGP)
Number of Digital Outputs/Relays
(one also used for Monitor OK alarm)*
IOBGP-00/ 01
IOBGP-10/11
IOBGP-20/21
6
10
8
Contact Arrangement One changeover contact per relay
Contact Rating 0.1A @ 60V dc maximum
Connectors Screwless terminal blocks
Wire Size 0.5 - 2.0mm
2
[20 - 14 AWG]
Maximum Cable Length 20m (65 feet)
Isolation Relay connections are isolated to 500V dc from all
other circuitry, earth and system common.
* Digital Output 6 is also used as the Monitor Fail alarm relay. It will de-energize if the I/O
board loses power or loses communication with the SC300.
3
IE11 must have Compatibility mode disabled.
To Next Page
Loading...
