SC300 Handbook
10
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
Soft Keys
The function of the soft keys is indicated by the corresponding labels on the LCD screen. The
following table shows the most common labels and key functions.
Label Key function
Go to menu screen. See details on page 11.
Go back to parent menu screen.
Go to sub-menu or configuration screen*.
Save a new configuration setting*.
Ignore a new configuration setting*.
From the Main Screen, go to the Summary Screen
* See Changing a Configuration Setting on page 13.
Navigation Keys
Key Function
• Move up/down in the menu screen. See details on page 11.
• Move up/down in a list (hold to go to the top or bottom of the list).
• Select options in a configuration screen.
• Increase/decrease a value in a configuration screen.
• From the Main Screen, press up arrow to go to Active Alarms, and down
arrow to go to Setup.
• Move left/right in the menu screen. See details on page 11.
• Move left/right between tabs in Rectifiers, Alarms, Battery or Settings
menus.
• Move left/right between segments of a multiple segment value in a
configuration screen.
• From the Main Screen, press left arrow to go to Control Processes, and
right arrow to go to Analogs.
To Next Page
Loading...
