SC300 Operation
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
17
SC300 Identity Information
The following identity information is stored in the SC300.
Parameter Description Where to find:
Serial Number The SC300 serial number (factory set). SC300: Info
Web:
Identity > Software
DCTools:
Configuration > Identity >
Software
Software Version
(App Version)
The version of the embedded
software in the SC300 (factory set).
If required, the following site specific information can be stored in the SC300 to assist site
management.
Parameter Description Where to find:
System
Manufacturer
The manufacturer of the dc power
system.
Web: Identity
DCTools:
Configuration > Identity
System Type The dc power system model number.
System Serial
Number
The dc power system serial number.
System Location Location of dc power system at the
site.
Map Coordinates Longitude and latitude. When these
values are entered, a web browser
will show these coordinates on a map
(using Google Maps).
Site Name Name of the site.
Site Address Address of the site.
Site Building The building name.
Site Room The equipment room name.
Site Contact Contact details for the person in
charge of the site.
Site Support
Contact
Details of the person supporting this
equipment.
Site Notes Any notes relevant to site access,
location or other matters.
Configuration
Name
A name that can be entered for the
configuration file.
This name is automatically loaded if the
user selects a Generic System Type, or
when a configuration file is loaded from
web or DCTools.
To Next Page
Loading...
