SC300 Handbook
18
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
The following configuration information is automatically stored by the SC300:
Parameter Description Where to find:
Master
Configuration
2
The name of the configuration file
that was last loaded into the SC300 by
web interface or DCTools. A version
number (such as “87668” is attached)
to assist tracking of changes.
Web: Identity
DCTools:
Configuration > Identity
Configuration
Version
A unique number that is changed
whenever this configuration is
updated.
Configuration
Modified
This is ticked when any settings have
been changed from the last loaded
configuration file.
2
If the current configuration is corrupted for any reason, the SC300 will revert to this configuration.
To Next Page
Loading...
