SC300 Handbook
80
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
Typical operation for hybrid power systems
1.
Battery discharge reaches the Ah Threshold. The Generator Control output becomes active and the
relay contacts close. The Generator Run circuit is completed allowing the generator to start. Battery
begins to recharge.
2.
Battery recharge is complete. The Generator Control output becomes inactive and the relay contacts
open. The Generator Run circuit is interrupted causing the generator to stop. Battery begins to
discharge.
Battery Discharge
Generator Run
To Next Page
Loading...
